Surface Mount 0606 Wall Wash
$100.00
Item
surface-mount-0606-wall-wash
ARCHITECTURAL COLLECTION
Description
ESSENSE Surface Mount Wall Wash illuminates vertical surfaces with uniform brightness. Whether you are accentuating a fireplace, artwork or using reflected light off of matte surfaces to make the room brighter, the surface mount wall wash will provide soft diffused lighting.
- Concealed mounting hardware, minimal end cap thickness (0.04” thick)
- Tight LED pitch (Static White. 72 LEDs/ft. warm dim. 52 LEDs/ft) for uniform illumination
- Concealed joiner allows individual segments to be joined with minimal shadowing
- Fixtures available in 1-inch increments up to 50 ft. length includes end caps
- Fixtures longer than 8 ft contain multiple equal length segments that are joined in the field
- Reverse-phase and forward-phase dimming down to 0.2%, Lutron Hi-lume Ecosystem down to 0.1%, Standard 0-10V down to 5%, and eldoLED 0-10V down to 0.1%
- Registered CEC appliance database. complies with CEC 2019 title 24 part 6
- ETL listed Class 2, Damp Location
OVERVIEW
ESSENSE Surface Mount Wall Wash illuminates vertical surfaces with uniform brightness. Whether you are accentuating a fireplace, artwork or using reflected light off of matte surfaces to make the room brighter, the surface mount wall wash will provide soft diffused lighting.
- Concealed mounting hardware, minimal end cap thickness (0.04” thick)
- Tight LED pitch (Static White. 72 LEDs/ft. warm dim. 52 LEDs/ft) for uniform illumination
- Concealed joiner allows individual segments to be joined with minimal shadowing
- Fixtures available in 1-inch increments up to 50 ft. length includes end caps
- Fixtures longer than 8 ft contain multiple equal length segments that are joined in the field
- Reverse-phase and forward-phase dimming down to 0.2%, Lutron Hi-lume Ecosystem down to 0.1%, Standard 0-10V down to 5%, and eldoLED 0-10V down to 0.1%
- Registered CEC appliance database. complies with CEC 2019 title 24 part 6
- ETL listed Class 2, Damp Location
Technical Resources
Configure Surface Mount 0606 Wall Wash
WHAT DIMMING PROTOCOL WILL YOU BE USING?
FIXTURE CONFIGURATION
| ESSF0606 | ESSENCE Surface Mount 0.6"W X 0.6"H |
| U | U-Series |
| P | P-Series |
| D | D-Series |
Whole Numbers Only
| LENGTH IN INCHES | LENGTH IN INCHES |
| 19 | 190 LM/FT |
| 23 | 230 LM/FT |
| 15 | 155 LM/FT |
| 30 | 305 LM/FT |
| 42 | 420 LM/FT |
| 58 | 585 LM/FT |
| 924 | 2400K |
| 927 | 2700K |
| 930 | 3000K |
| 935 | 3500K |
| 942 | 4200K |
| 9W31 | Warm Dim 3000K-1800K |
| 1 | Wall Wash |
| W | White (Paintable) |
| B | Black |
| A | Satin Aluminum |
| A | Adjustable |
| F | Fixed |
| G | Magnetic |
| 2 | 2 Feeds |
| 1L | 1 Feed Left |
| 1R | 2 Feed Right |
| B | Back |
| E | End |
| F | Factory Assembled |
Quantity
Actual Length
Refer to spec sheet for details
Power Calculation
icon
X
Total wattage calculated by total length x watts/ft. Power supplies should be loaded to no more than 90% of rated output (e.g. 96 W power supply derated to 86 W). For single continuous runs only, published maximum run lengths on specification sheet may be used, as they account for voltage drop and may exceed derated values. Not applicable to multiple shorter runs on one power supply.
Power Supplies
Accessories
| ESLTCLPJ | ESSENCE Wire Management Clip J Type 10-Pack |
Overview
ESLTCLPJ are designed with simplicity to help route and conceal wiring.
Tools and Downloads